BRP3M-MDT.png
New

AUTONICS BRP3M-MDT (RETROREFLECTIVE TYPE) PHOTOELECTRIC SENSOR

Sensing typeRetroreflective type
Sensing distance3m(MS-2)
Sensing targetOpaque material of min. Ø60mm
Light sourceRed LED(660nm)
Response timeMax. 1ms
Power supply12-24VDC  ±10%(ripple P-P: max. 10%)
Current consumptionMax. 45mA
Sensitivity adjustmentSensitivity adjuster
Operation modeLight ON/Dark ON(set by control wire)
Control outputNPN open collector
Connection typeCable type(Ø5, 2m)
Environment_Ambient illuminationSunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination)
Environment_Ambient temperature-10 to 60℃, storage: -25 to 75℃
Protection structureIP66
Approval
Environment_Ambient humidity35 to 85% RH, storage: 35 to 85% RH
MaterialCase-Polyamide(black), Sensing part-Acrylic lens
Accessories_IndividualAdjustment screwdriver, Reflector(MS-2)
Accessories_CommonFixing nuts
WeightApprox. 140g(approx. 100g)

※The sensing distance is specified with using the MS-2 reflector. The distance between the sensor and the reflector should be set over
0.1m. When using reflective tapes, the reflectivity will vary by the size of the tape. Please refer to the catalog or website.
※The weight includes packaging. The weight in parenthesis is for unit only.
※Tightening torque for connector is 0.39 to 0.49N.m.
※The temperature or humidity mentioned in Environment indicates a non freezing or condensation.


Customer Reviews
0 / 5
Total 0 Ratings